- Posts: 57
- Thank you received: 3
Welcome to the LimeSurvey Community Forum
Ask the community, share ideas, and connect with other LimeSurvey users!
validation - minimum answer
- delarammahdaviii
- Topic Author
- Offline
- Senior Member
Less
More
8 years 1 month ago #130297
by delarammahdaviii
validation - minimum answer was created by delarammahdaviii
hi
what is different " that each entry is greater than three, you would set the "Sub-question validation equation" to (this > 3) " with "minimum answer 3" ?
what is different " that each entry is greater than three, you would set the "Sub-question validation equation" to (this > 3) " with "minimum answer 3" ?
The topic has been locked.
- DenisChenu
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 13912
- Thank you received: 2549
8 years 1 month ago #130300
by DenisChenu
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Replied by DenisChenu on topic validation - minimum answer
Hi,
minimum answer : 3 => count(self) >= 3
not (this >3)
Where do you see that ?
Denis
minimum answer : 3 => count(self) >= 3
not (this >3)
Where do you see that ?
Denis
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
The topic has been locked.
- delarammahdaviii
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 57
- Thank you received: 3
8 years 1 month ago #130308
by delarammahdaviii
Replied by delarammahdaviii on topic validation - minimum answer
thanks for reply denis
i see( this > 3) in this link
manual.limesurvey.org/Expression_Manager....27that.27_variables
and minimum answer in array number
i see( this > 3) in this link
manual.limesurvey.org/Expression_Manager....27that.27_variables
and minimum answer in array number
The topic has been locked.
- DenisChenu
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 13912
- Thank you received: 2549
8 years 1 month ago #130348
by DenisChenu
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Replied by DenisChenu on topic validation - minimum answer
with "this > 3", it's not "minimum answer" but more like minimum value.
In a multi numeric question : it's the same tahn minimum_value > 3 mandatory.
In general : all advanced settings of question can be done with Sub-question validation equation or Question validation equation.
Sometimes : advanced settings add some JS (exclude_all_others for example), and have a "default translated string'.
In a multi numeric question : it's the same tahn minimum_value > 3 mandatory.
In general : all advanced settings of question can be done with Sub-question validation equation or Question validation equation.
Sometimes : advanced settings add some JS (exclude_all_others for example), and have a "default translated string'.
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
The following user(s) said Thank You: delarammahdaviii
The topic has been locked.
- ledoux
- Offline
- Premium Member
Less
More
- Posts: 159
- Thank you received: 0
7 years 9 months ago #137346
by ledoux
New user of LS but with the will to contribute to this great community !
Replied by ledoux on topic validation - minimum answer
HI
I have a "array" question (multi-items), and I put the option "mandatory answer". I set a minimum number of answers (X).
The message "you need to fill at least X questions" appears in the questionnaire, but it doesn't work: I need to fill ALL the questions to pass to the next page.
Do you know why? Is there any other operation to do?
Thank you !!!
I have a "array" question (multi-items), and I put the option "mandatory answer". I set a minimum number of answers (X).
The message "you need to fill at least X questions" appears in the questionnaire, but it doesn't work: I need to fill ALL the questions to pass to the next page.
Do you know why? Is there any other operation to do?
Thank you !!!
New user of LS but with the will to contribute to this great community !
The topic has been locked.
- tpartner
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 10612
- Thank you received: 3691
7 years 9 months ago #137348
by tpartner
Cheers,
Tony Partner
Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
Replied by tpartner on topic validation - minimum answer
You need to use either the mandatory setting (all rows answered) or minimum answers (n rows answered), not both.
Cheers,
Tony Partner
Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
The following user(s) said Thank You: ledoux
The topic has been locked.
- ledoux
- Offline
- Premium Member
Less
More
- Posts: 159
- Thank you received: 0
7 years 9 months ago #137349
by ledoux
New user of LS but with the will to contribute to this great community !
Replied by ledoux on topic validation - minimum answer
great, it works ! thank you !!
another question on that topic : I put this option (X rows) on a "multiple numeric array", with cursors. When I try to pass to the next question without answering to X answers, then it says "please answer at least X questions", but then all the cursors are set automatically in the middle position (with a value "0", that I set), and if I push "next" I can pass the question without answering to X questions. And all the cursors have the default value "0"
(NB : I haven't chosen the option "put the cursor in the middle position" to avoid this "0 defaut value" that allow to pass to the next question without answering)
Is that clear? I hope !
Thank you
another question on that topic : I put this option (X rows) on a "multiple numeric array", with cursors. When I try to pass to the next question without answering to X answers, then it says "please answer at least X questions", but then all the cursors are set automatically in the middle position (with a value "0", that I set), and if I push "next" I can pass the question without answering to X questions. And all the cursors have the default value "0"
(NB : I haven't chosen the option "put the cursor in the middle position" to avoid this "0 defaut value" that allow to pass to the next question without answering)
Is that clear? I hope !
Thank you
New user of LS but with the will to contribute to this great community !
The topic has been locked.
- DenisChenu
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 13912
- Thank you received: 2549
7 years 9 months ago #137355
by DenisChenu
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Replied by DenisChenu on topic validation - minimum answer
Hi ,
It's OK with a 2.06 version, then surely a 2.50 bug. Miust be reported.
Denis
It's OK with a 2.06 version, then surely a 2.50 bug. Miust be reported.
Denis
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
The topic has been locked.
- ledoux
- Offline
- Premium Member
Less
More
- Posts: 159
- Thank you received: 0
7 years 9 months ago #137363
by ledoux
New user of LS but with the will to contribute to this great community !
Replied by ledoux on topic validation - minimum answer
Don't have time to up-grade... ;-(
Ok I will report. But may you remind me how to go on the right bug tracker page (last time I've been on the wrong one...). Thank you
Ok I will report. But may you remind me how to go on the right bug tracker page (last time I've been on the wrong one...). Thank you
New user of LS but with the will to contribute to this great community !
The topic has been locked.
- DenisChenu
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 13912
- Thank you received: 2549
7 years 9 months ago #137365
by DenisChenu
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Replied by DenisChenu on topic validation - minimum answer
Yes,
You need to select "BUG" at top/right.
But the last build have less tha 1 hour. Think it can be interseting to manually upgrade.
Denis
You need to select "BUG" at top/right.
But the last build have less tha 1 hour. Think it can be interseting to manually upgrade.
Denis
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
The following user(s) said Thank You: ledoux
The topic has been locked.
- ledoux
- Offline
- Premium Member
Less
More
- Posts: 159
- Thank you received: 0
7 years 9 months ago #137367
by ledoux
New user of LS but with the will to contribute to this great community !
Replied by ledoux on topic validation - minimum answer
Yes, true.
but the last time that I up-graded, the model I built was not compatible with the new version. I had to restart from "default" and operate all the changes in CSS, etc. I would like to avoid that risk. I'm using Version 2.50+ Build 160418
but the last time that I up-graded, the model I built was not compatible with the new version. I had to restart from "default" and operate all the changes in CSS, etc. I would like to avoid that risk. I'm using Version 2.50+ Build 160418
New user of LS but with the will to contribute to this great community !
The topic has been locked.
- DenisChenu
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 13912
- Thank you received: 2549
7 years 9 months ago #137368
by DenisChenu
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Replied by DenisChenu on topic validation - minimum answer
Totally right .....
One of the reason of SkeletonQUest not fixed/started actually ....
I really don't like the new system for template : no "global css or js" : when a fix is done on default : fix must be applied for owner template....
I don't understand why we add bootstrap ....
Denis
PS : this must be reported too
One of the reason of SkeletonQUest not fixed/started actually ....
I really don't like the new system for template : no "global css or js" : when a fix is done on default : fix must be applied for owner template....
I don't understand why we add bootstrap ....
Denis
PS : this must be reported too
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
The following user(s) said Thank You: ledoux
The topic has been locked.