Intégration du panneau
From LimeSurvey Manual
Les exemples et explications suivants sont entièrement basés sur les contributions de nos utilisateurs. N'hésitez pas à contribuer si vous souhaitez contribuer à élargir nos connaissances ouvertes sur l'intégration de panels.
Présentation
Depuis cet onglet vous pouvez définir les paramètres d'URL qui seront acceptés par votre enquête. (Ces paramètres seront attachés à l'URL de début de l'enquête générale). Cette option est importante si vous souhaitez intégrer votre enquête à un fournisseur de panel d'enquête professionnel qui fournit les participants à votre place. Ce dernier fournit généralement l'identifiant unique de chaque participant à l'enquête et vous devrez enregistrer ces identifiants uniques pour référence ultérieure.
Attention : Avec certains fournisseurs, l'identifiant unique du participant qui sera omis en raison d'une limitation de quota ou à la fin de l'enquête, doit être renvoyé au fournisseur de panel dans l'URL de fin de l'enquête ou URL de quota.
Intégration du panel de l'enquête : Menu Enquête > Menu Enquête > Intégration du panel
Intégration du panel d'enquête
Un tableau vide sera affiché avec l'option qui vous permet "d'ajouter un paramètre URL".
Deux champs sont à remplir :
- Parameter: Type in this field the name of the new parameter.
- Target question:. The value of the parameter is always saved in the survey session, even if you don't set a target question here. Here, you can select a question of type 'Sort text' or 'Multiple texts'.
If you do not save the value of the URL parameter, you will still be able to use this parameter in the end URL. For further documentation, continue reading the End-URL wiki section.How to use the panel integration function
A simple example is presented below to explain how to use the panel integration function.
1) First, create a short/long free text question and name it what ever you want (we will use "LS" for the Question code field). Then, enable the always hide this question option, located under the Display tab within the menu of the question.
2) Go to the panel integration tab, and click the "Add URL parameter".
Select the short/long text question you created in the first step. The participants that come from the respective professional panel provider will land on the target question. It can be hidden so that the participants can start completing the survey.
The name you pick for the parameter will have to be included in the entry link that you will later supply to your panel provider. It will be named "LSid" in our example. Don't forget to click the Save button located in the upper right part of the table!
3) Now, you have to set up the entry link that you will send to the your panel provider. To get your survey URL link, click the Preview survey buttons.
Copy the URL you accessed from the address bar:
Hint: The "newtest" parameter is used to reset the session. This is useful when you wish to test locally the panel integration or when you know that your participants are using the same device/browser to fill out the survey. Therefore, adding "newtest=Y" in the survey URL creates new answers in the responses table by forcing the creation of a new session regardless of the used device/browser..
Add at the end the newly added parameter: &LSid="xxxxxx". The link should look like this:
http://localhost/index.php/369498?newtest=Y&lang=en&LSid="xxxxxx"
Hint: The GET parameters use "?" for the first parameter and "&" for the rest of them. If you already have "?" in your URL, you must use "&" to add other GET parameters. Read about the GET parameters and their usage here.
What ever you replace the "xxxxxx" with will be stored in the short/long free text question when your respondent lands on that page. For example, I sent to a user the following link:
http://localhost/index.php/369498?newtest=Y&lang=en&LSid=ABCD5
The string after LSid was stored as an answer to the short/long text question.
Read the URL fields wiki section for more information on URL customization.Examples
The following examples were created to help you add:
- Redirects if the respondents have finished filling out the survey;
- Redirects if the respondents were screened out due to a quota;
- Redirects link if the quota limit was reached.
Note: parametername={PASSTHRU:parametername}" provides the panel provider the id of the participant.
Attention : The solutions provided below make use of the passthrough fields. Please note that besides "parametername={PASSTHRU:parametername}", everything else has to be provided by your panel provider!
The complete link
The complete link must be inserted into the end URL field that also has to be loaded automatically for everyone who successfully completes the whole survey.
The URL you have to send back to the panel provider should look like this:
https://panelproviderwebsite.com/?return=complete¶metername={PASSTHRU:parametername}
The screenout link
A screenout prevents the participants from continuing the survey because he or she is not a member of your survey target group. For screenouts, you have to set the quota limit field to "0" (zero) and allow the quota URL to be automatically loaded once it was triggered.
Then, add the following link into the quota URL field:
https://panelproviderwebsite.com/?return=screenout¶metername={PASSTHRU:parametername}
Note: Read the following wiki section to find out more about the LimeSurvey quota system and its usage.The quotafull link
A quotafull excludes participants from continuing the survey, because a certain quota has been exceeded.
https://panelproviderwebsite.com/?return=quotafull¶metername={PASSTHRU:parametername}
Note: Read the following wiki section to find out more about the LimeSurvey quota system and its usage.
Survey panel integration via expressions
Under construction