Panel Providers and Limesurvey - your experience?

  • TwentyTwo
  • Avatar de TwentyTwo
  • Invitado
  • Invitado
5 años 10 meses antes #99139 por TwentyTwo
Respuesta de TwentyTwo sobre el tema Panel Providers and Limesurvey - your experience?
Most of the time the link (from the panelprovider) can be used once, so the security is done on their part.
They just pass the respondent to the survey hosted in your Limesurvey.
The link itself will not be shown to the respondent.
If they have completed the survey the ID is send back and recorded as complete on the panelproviders end.
So if that same respondent wants to participate again, their system will not allow to continue and the redirect itself to the limsurvey survey will not work.
Also the respondent will receive only once their incentive.
So there will not be a reason to fill it more than once.
If they do, you can just easily clean (if you can fill int the survey more then once) it afterwards, every double ID will be removed.
Hope that helps, Dennis

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
4 años 4 meses antes #116991 por Mazi

amoswagon escribió: I see.
But you cannot really validate that panelists don't modify those IDs and take the survey multiple times.

The only way to do this is e.g. loading all panel user IDs into Limesurvey and using the ID as token at Limesurvey.
If you set up Limesurvey to use each token only once, then the token will be marked "used" after submit.

This is rarely used because the work-flow without tokens usually works fine for the reasons mentioned by TwentyTwo.

Best regards/Beste Grüße,
Dr. Marcel Minke
Need Help? We offer professional Limesurvey support
Contact: marcel.minke(at)survey-consulting.com
Want to use your survey offline -> www.offlinesurveys.com

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
4 años 4 meses antes #117019 por DenisChenu
New plugin event 'beforeSurveyPage' allow us to create token on the fly.

Some provider offer too API json for information from user.

A solution ca be:
- User come with "panel user id"
- Testing if this panel user id exist in token table :
- if yes : go to the survey with the good token
- If no : search with the API for extra user information and create a token with all information
- redirect to the good token

I already done this with www.panelwizard.com API.

Denis

Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand .
An error happen ? Before make a new topic : remind the Debug mode .

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
4 años 4 meses antes #117022 por Mazi

DenisChenu escribió: New plugin event 'beforeSurveyPage' allow us to create token on the fly.

Some provider offer too API json for information from user.

A solution ca be:
- User come with "panel user id"
- Testing if this panel user id exist in token table :
- if yes : go to the survey with the good token
- If no : search with the API for extra user information and create a token with all information
- redirect to the good token
Denis

...and for the token you are using the passed panel user ID to prevent duplicates and double registrations later?

Best regards/Beste Grüße,
Dr. Marcel Minke
Need Help? We offer professional Limesurvey support
Contact: marcel.minke(at)survey-consulting.com
Want to use your survey offline -> www.offlinesurveys.com

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
4 años 4 meses antes #117024 por DenisChenu

Mazi escribió: ...and for the token you are using the passed panel user ID to prevent duplicates and double registrations later?

No,

Actually : i create token with attribute_1 to panel_uid. Whan come with a panel_uid : search on the token table for corresponding token. If exist : redirect, if not create and redirect.

Then token is really hardest to find.

Denis

Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand .
An error happen ? Before make a new topic : remind the Debug mode .

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
1 año 6 meses antes #161518 por rvenkat
Is there anyone who can help me integrate Research Now panel with my survey? I have redirect URLs for screenouts, completes and overquota. I'm screening out people under 18 years and those outside of a specific province. There are no other quotas. After the first 2000 responses, everyone else should be redirected to the overquota URL.

If you can do this for me, please send me a private message and let me know your fee. I need to launch the survey ASAP.

Thanks,

rvenkat

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
1 año 6 meses antes #161560 por Mazi
Hi Ramesh,

I am very familiar with this setup and can help adding the required URLs. Just send me the details to Esta dirección de correo electrónico está siendo protegida contra los robots de spam. Necesita tener JavaScript habilitado para poder verlo.

Best regards/Beste Grüße,
Dr. Marcel Minke
Need Help? We offer professional Limesurvey support
Contact: marcel.minke(at)survey-consulting.com
Want to use your survey offline -> www.offlinesurveys.com
El siguiente usuario dijo gracias: rvenkat

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
1 año 6 meses antes #161637 por rvenkat
My panel integration is working perfectly with Research Now.
Thanks to this forum participants.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
11 meses 3 semanas antes #170454 por mado88
I am working with respondi as the panel provider, but I'm still struggling with the panel integration. I read the manual and tried to follow it, but it doesn't work.

It seems that I'm doing something wrong with the re-direct links. After completing the survey, the first page appears again.

I attached the survey structure.

Maybe someone can have a look at it and help to fix the problem.

Thanks for your help.
Adjuntos:

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
11 meses 3 semanas antes #170460 por Joffm
Hi, Marius,

unfortunately you didn't tell us your LS version.
I suppose it is not 3.x, because you created your own privacy messages.

Well, I started the survey with the parameter "tic=wertzu" and after completing I was sent to
https://mingle.respondi.com/s/960852/ospe.php3?c_0002=1&return_tic=wertzu

which showed the following:


The links seem to be fine; just be sure to capture the correct parameter.

Sorry, I am not able to reproduce.

Best regards
Joffm


Volunteers are not paid.
Not because they are worthless, but because they are priceless
Adjuntos:

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

Más
11 meses 3 semanas antes - 11 meses 3 semanas antes #170468 por mado88
Dear Joffm,


Thanks a lot! Seems that I am on the right way, but I'm still struggling. When I completed the survey, I didn't see the page you attached, but was referred back to the start page.

My version is 3.12.2. Sorry I forgot.

According to the manual, it is necessary to disable the welcome page when using the panel integration function, because the survey needs to start with the (hidden) short term question which saves the respondent's ID.

I created a Question called "panel", then I added a parameter called "tic", the target question is "panel".

This is the redirect link the panel provider provided:

mingle.respondi.com/s/960852/ospe.php3?c_0002=1&return_tic= [unserTicket]

Following the manual, I need to replace [unser Ticket] with the expression {PASSTHRU:parametername}. It would look like this:

mingle.respondi.com/s/960852/ospe.php3?c...rn_tic={PASSTHRU:tic }


I start the survey by copying the survey URL and adding &tic=hewda (for example). It doesn't work. I am not redirected to the end URL.

Did I do anything wrong? Thanks again!
Última Edición: 11 meses 3 semanas antes por mado88.

Por favor, Identificarse o Crear cuenta para unirse a la conversación.

¡Comenzar ahora!

Simplemente cree una cuenta y comience a usar LimeSurvey hoy mismo.

Registrarse ahora
¡Únase a nuestro boletín informativo!

Iniciar sesión