- Posts: 14
- Thank you received: 1
Welcome to the LimeSurvey Community Forum
Ask the community, share ideas, and connect with other LimeSurvey users!
logo does not show in bluengrey template
- limetaking
- Topic Author
- Offline
- New Member
Less
More
10 years 1 month ago #105789
by limetaking
logo does not show in bluengrey template was created by limetaking
Hi there,
I have just successfully edited the basic template and was able to change the logo.
however when i tried to do the same in the bluengrey template to insert a logo on the welcome page it did not work. All that i got was a square box where the image should have been. the text enter was as follows
<img src="{TEMPLATEURL}THOTF_logo_small.jpg" alt="Logo Image" height= "75" width 200/>
Could you also tell me where do i go to change the text
"Template Sample
This is a sample survey description. It could be quite long.
But this one isn't."
please see screen shot attached
I have just successfully edited the basic template and was able to change the logo.
however when i tried to do the same in the bluengrey template to insert a logo on the welcome page it did not work. All that i got was a square box where the image should have been. the text enter was as follows
<img src="{TEMPLATEURL}THOTF_logo_small.jpg" alt="Logo Image" height= "75" width 200/>
Could you also tell me where do i go to change the text
"Template Sample
This is a sample survey description. It could be quite long.
But this one isn't."
please see screen shot attached
Attachments:
The topic has been locked.
- DenisChenu
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 13647
- Thank you received: 2491
10 years 1 month ago #105794
by DenisChenu
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Replied by DenisChenu on topic logo does not show in bluengrey template
<img src="{TEMPLATEURL}/THOTF_logo_small.jpg" alt="Logo Image" height= "75" width 200/>
I think
I think
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
The following user(s) said Thank You: limetaking
The topic has been locked.
- tpartner
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 10109
- Thank you received: 3595
10 years 1 month ago - 10 years 1 month ago #105806
by tpartner
.
Cheers,
Tony Partner
Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
Replied by tpartner on topic logo does not show in bluengrey template
This is just placeholder text. To change it you will need to modify the translation.Could you also tell me where do i go to change the text...
.
Cheers,
Tony Partner
Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
Last edit: 10 years 1 month ago by tpartner.
The following user(s) said Thank You: limetaking
The topic has been locked.
- limetaking
- Topic Author
- Offline
- New Member
Less
More
- Posts: 14
- Thank you received: 1
10 years 1 month ago #105851
by limetaking
Replied by limetaking on topic logo does not show in bluengrey template
thanks to you both, there appear to be a bug in the image file.
All sorted now.
just got one question.
I don't appear to be able to get the thank you page up at the end of the survey.
I have checked through the manual but it does not appear to cover this.
All sorted now.
just got one question.
I don't appear to be able to get the thank you page up at the end of the survey.
I have checked through the manual but it does not appear to cover this.
The topic has been locked.
- tpartner
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 10109
- Thank you received: 3595
10 years 1 month ago #105860
by tpartner
Cheers,
Tony Partner
Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
Replied by tpartner on topic logo does not show in bluengrey template
Do you have "Automatically load URL when survey complete" set to "No"?
What happens when you complete the survey?
.
What happens when you complete the survey?
.
Cheers,
Tony Partner
Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
The topic has been locked.
- limetaking
- Topic Author
- Offline
- New Member
Less
More
- Posts: 14
- Thank you received: 1
10 years 1 month ago #105900
by limetaking
Replied by limetaking on topic logo does not show in bluengrey template
Hi there,
thanks for your response
i shall address your response as there appear.
Do you have "Automatically load URL when survey complete" set to "No"? I don't know where to find this so i am not sure
What happens when you complete the survey? I get the following response
404 Not found.
The survey in which you are trying to participate does not seem to exist. It may have been deleted or the link you were given is outdated or incorrect.
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
If you think this is a server error, please contact the webmaster.
thanks for your response
i shall address your response as there appear.
Do you have "Automatically load URL when survey complete" set to "No"? I don't know where to find this so i am not sure
What happens when you complete the survey? I get the following response
404 Not found.
The survey in which you are trying to participate does not seem to exist. It may have been deleted or the link you were given is outdated or incorrect.
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
If you think this is a server error, please contact the webmaster.
The topic has been locked.
- holch
- Away
- LimeSurvey Community Team
Less
More
- Posts: 11659
- Thank you received: 2742
10 years 1 month ago - 10 years 1 month ago #105905
by holch
As Denis said, but it of course depends on where you uploaded your image to. If it is directly in the template folder, then:
Make sure that you code correctly (you were missing a = and some "". This is important. You have to be very exact. However, if your image is somewhere else, you will have to change the patch after {TEMPLATEURL} accordingly.
This looks like the survey description that you can add/change in the GUI. I think you really need to play around a little with the GUI, go through everything, look what options are there, try to understand them. If you don't, read in the manual about it. Once you have spent 30min on there, I am sure you will remember that you have seen such and such option and you will understand LS a lot better. To help you out for this problem go to the respective survey (assuming you are using LS 2.0 or above...), then click on the pencil and choose "edit text elements". There you should be able to change the survey titel, description, welcome/end message AND the end url (which brings us to your other problem.
If you want the end message and not redirect to another URL outside of Limesurvey, you should have an end url.
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
Replied by holch on topic logo does not show in bluengrey template
limetaking wrote: I have just successfully edited the basic template and was able to change the logo.
however when i tried to do the same in the bluengrey template to insert a logo on the welcome page it did not work. All that i got was a square box where the image should have been. the text enter was as follows
<img src="{TEMPLATEURL}THOTF_logo_small.jpg" alt="Logo Image" height= "75" width 200/>
As Denis said, but it of course depends on where you uploaded your image to. If it is directly in the template folder, then:
Code:
<img src="{TEMPLATEURL}/THOTF_logo_small.jpg" alt="Logo Image" height= "75" width="200" />
Make sure that you code correctly (you were missing a = and some "". This is important. You have to be very exact. However, if your image is somewhere else, you will have to change the patch after {TEMPLATEURL} accordingly.
Could you also tell me where do i go to change the text
"Template Sample
This is a sample survey description. It could be quite long.
But this one isn't."
please see screen shot attached
This looks like the survey description that you can add/change in the GUI. I think you really need to play around a little with the GUI, go through everything, look what options are there, try to understand them. If you don't, read in the manual about it. Once you have spent 30min on there, I am sure you will remember that you have seen such and such option and you will understand LS a lot better. To help you out for this problem go to the respective survey (assuming you are using LS 2.0 or above...), then click on the pencil and choose "edit text elements". There you should be able to change the survey titel, description, welcome/end message AND the end url (which brings us to your other problem.
If you want the end message and not redirect to another URL outside of Limesurvey, you should have an end url.
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
Last edit: 10 years 1 month ago by holch.
The following user(s) said Thank You: limetaking
The topic has been locked.
- limetaking
- Topic Author
- Offline
- New Member
Less
More
- Posts: 14
- Thank you received: 1
10 years 1 month ago - 10 years 1 month ago #105907
by limetaking
Replied by limetaking on topic logo does not show in bluengrey template
thanks for that.
The key issues is i can not get the thank you page to appear at the end of the survey.
that is why i put in a end url, but even that is causing errors.
where is the thank you or end page? i can see it when i go into the template editor but i can not locate it at all
What i would like is the end page to thank them for completed the survey and then direct user back to main site.
Yes i have been spending hour at a time trying to read through the manual
The key issues is i can not get the thank you page to appear at the end of the survey.
that is why i put in a end url, but even that is causing errors.
where is the thank you or end page? i can see it when i go into the template editor but i can not locate it at all
What i would like is the end page to thank them for completed the survey and then direct user back to main site.
Yes i have been spending hour at a time trying to read through the manual
Last edit: 10 years 1 month ago by limetaking.
The topic has been locked.
- holch
- Away
- LimeSurvey Community Team
Less
More
- Posts: 11659
- Thank you received: 2742
10 years 1 month ago #105908
by holch
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
Replied by holch on topic logo does not show in bluengrey template
So was the problem with the logo solved?
Was the problem with the text solved?
Regarding the end message:
First of all, you did not answer what version of Limesurvey you are using, please be specific, not only 1.9x, 2.0 or 2.05 but the exact version.
Then: take out the end url. What happens when you go through your survey? What exactly happens at the end?
Can you give a link to a test survey, where we can see ourselves? Does this happen with all surveys, or just with one specific?
Was the problem with the text solved?
Regarding the end message:
First of all, you did not answer what version of Limesurvey you are using, please be specific, not only 1.9x, 2.0 or 2.05 but the exact version.
Then: take out the end url. What happens when you go through your survey? What exactly happens at the end?
Can you give a link to a test survey, where we can see ourselves? Does this happen with all surveys, or just with one specific?
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
The following user(s) said Thank You: limetaking
The topic has been locked.
- limetaking
- Topic Author
- Offline
- New Member
Less
More
- Posts: 14
- Thank you received: 1
10 years 1 month ago #105959
by limetaking
Replied by limetaking on topic logo does not show in bluengrey template
Hi holch,
yes the first two issues have been resolved thanks to this forum.
I have set up a test and that works ok, with the end url and without a end url.
In both cases it created the thank you page.
I went back to the original survey and took out the end url and the thank you page appeared but was unable to get back to the website. When i put the end url back in the thank you page disappeared.
Do you have any idea what or where that bug may be?
yes the first two issues have been resolved thanks to this forum.
I have set up a test and that works ok, with the end url and without a end url.
In both cases it created the thank you page.
I went back to the original survey and took out the end url and the thank you page appeared but was unable to get back to the website. When i put the end url back in the thank you page disappeared.
Do you have any idea what or where that bug may be?
The topic has been locked.
- holch
- Away
- LimeSurvey Community Team
Less
More
- Posts: 11659
- Thank you received: 2742
10 years 1 month ago #105960
by holch
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
Replied by holch on topic logo does not show in bluengrey template
Well, now I understand better!
Problem solved. It is not bug, it is just normal behaviour.
If you put a end url, what limesurvey does is redirecting you to this url as soon as you reach the end page, which means you won't see the end page.
You can't have both, either the redirect OR the end page.
So there are a few things that you could do if you want a end message and then a redirect:
- You could put a simpel text display question with your end message and then use the end url, this means it will still skip the end page but you have your own endpage ( manual.limesurvey.org/Question_types#Text_display )
- Or you could include the URL to your website as a link on the end page.
- Maybe there is a way to use javascript on the end page to redirect after a few seconds.
-
Problem solved. It is not bug, it is just normal behaviour.
If you put a end url, what limesurvey does is redirecting you to this url as soon as you reach the end page, which means you won't see the end page.
You can't have both, either the redirect OR the end page.
So there are a few things that you could do if you want a end message and then a redirect:
- You could put a simpel text display question with your end message and then use the end url, this means it will still skip the end page but you have your own endpage ( manual.limesurvey.org/Question_types#Text_display )
- Or you could include the URL to your website as a link on the end page.
- Maybe there is a way to use javascript on the end page to redirect after a few seconds.
-
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
The topic has been locked.