- Posts: 4
- Thank you received: 0
Welcome to the LimeSurvey Community Forum
Ask the community, share ideas, and connect with other LimeSurvey users!
Assessment in subquestion
- mel47
- Topic Author
- Offline
- New Member
Less
More
7 years 8 months ago #138654
by mel47
Assessment in subquestion was created by mel47
Hi,
How do we enable this relevance box in subquestions? As shown here : manual.limesurvey.org/Adding_answers_or_subquestions
I can't find this setting "Enable Assessment mode".
In fact, I think it's what I need. I want to display only subquestions which were answered "Y" in the precedent question (array y/n). Or hide those answered N, whatever is easier.
Thanks
Melanie
PS I used the last Version 2.50+ Build 160620
How do we enable this relevance box in subquestions? As shown here : manual.limesurvey.org/Adding_answers_or_subquestions
I can't find this setting "Enable Assessment mode".
In fact, I think it's what I need. I want to display only subquestions which were answered "Y" in the precedent question (array y/n). Or hide those answered N, whatever is easier.
Thanks
Melanie
PS I used the last Version 2.50+ Build 160620
The topic has been locked.
- holch
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 11758
- Thank you received: 2753
7 years 8 months ago #138657
by holch
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
Replied by holch on topic Assessment in subquestion
You create an array question or any other question that has subquestions (e.g. multiple answers) and then click on this arrow symbol.
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
The topic has been locked.
- mel47
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
7 years 8 months ago #138662
by mel47
Replied by mel47 on topic Assessment in subquestion
Thanks.
Maybe it's obvious but where is this arrow?
Maybe it's obvious but where is this arrow?
Attachments:
The topic has been locked.
- Drewskie
- Offline
- Junior Member
Less
More
- Posts: 21
- Thank you received: 1
7 years 8 months ago #138664
by Drewskie
Replied by Drewskie on topic Assessment in subquestion
From you explanation I believe you need to use relevance equation.
Example
Q1 Yes/No
Q2 relevance equation would be
Q1.NAOK=="Yes"
That way it will display if Q1 answer is yes.
Hope this is explained properly.
Example
Q1 Yes/No
Q2 relevance equation would be
Q1.NAOK=="Yes"
That way it will display if Q1 answer is yes.
Hope this is explained properly.
The topic has been locked.
- DenisChenu
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 13935
- Thank you received: 2551
7 years 8 months ago - 7 years 8 months ago #138665
by DenisChenu
manual.limesurvey.org/Survey_settings#No..._.26_data_management
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Replied by DenisChenu on topic Assessment in subquestion
Updated manual, adding screenshot. It's more clear ?mel47 wrote: I can't find this setting "Enable Assessment mode".
manual.limesurvey.org/Survey_settings#No..._.26_data_management
Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand , plugin development .
I don't answer to private message.
Last edit: 7 years 8 months ago by DenisChenu.
The topic has been locked.
- holch
- Offline
- LimeSurvey Community Team
Less
More
- Posts: 11758
- Thank you received: 2753
7 years 8 months ago #138676
by holch
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
Replied by holch on topic Assessment in subquestion
If you look at the link that you are providing at the beginning, there are little arrows in front of the "relevance" box.
However, looking at your screenshot I assume that you are using a question type that doesn't have "subquestions", but as your screenshot is in french, I can't tell. What question type do you use here (subquestion relevance should work with array questions and multiple response questions, not sure if there are any others).
If you need to use a single choice question where there is no subquestion relevance (as you don't have subquestions, but answer options) you could think about using a multiple response question type instead of the yes/no array. Then you could use the array filter option.
However, looking at your screenshot I assume that you are using a question type that doesn't have "subquestions", but as your screenshot is in french, I can't tell. What question type do you use here (subquestion relevance should work with array questions and multiple response questions, not sure if there are any others).
If you need to use a single choice question where there is no subquestion relevance (as you don't have subquestions, but answer options) you could think about using a multiple response question type instead of the yes/no array. Then you could use the array filter option.
I answer at the LimeSurvey forum in my spare time, I'm not a LimeSurvey GmbH employee.
No support via private message.
The topic has been locked.
- mel47
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
7 years 8 months ago #138687
by mel47
Replied by mel47 on topic Assessment in subquestion
You're right, I think I'm looking for something that doesn't exist. To be clear, with the good terminology this time:
Q1: array (11 subquestions): Y/N
Q2: Rank.
What I want is, in Q2, display answers who were answered Y in Q1.
How I could achieve that?
Melanie
PS Thanks, I found the "enable assessment", but I mess up with relevance (what I need).
Q1: array (11 subquestions): Y/N
Q2: Rank.
What I want is, in Q2, display answers who were answered Y in Q1.
How I could achieve that?
Melanie
PS Thanks, I found the "enable assessment", but I mess up with relevance (what I need).
The topic has been locked.
- mel47
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
7 years 8 months ago #138688
by mel47
Replied by mel47 on topic Assessment in subquestion
Found a workaround. Changed the array question Y/N by a multiple choice do the job by using Array Filter.
Thanks.
Thanks.
The topic has been locked.