Conditional setting based on set of questions

Mehr
11 Monate 1 Woche her #169603 von jimdavies
COM_KUNENA_MESSAGE_CREATED_NEW
I have a question I need to ask if someone answered 'Disagree' to either of the previous two questions but when I add the condition for the second question it goes on an AND condition instead of an OR.
Screen shot of the conditions attached
Anhang:

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

LimeSurvey Partners
Mehr
11 Monate 1 Woche her #169607 von holch
COM_KUNENA_MESSAGE_REPLIED_NEW
Which version of LS?
Can you attach a little test survey, with only the relevant questions included (.lss file)?

I'm not a LimeSurvey GmbH member. I answer at the LimeSurvey forum in my spare time. No support via private message.
Some helpful links: Manual (EN) | Question Types | Workarounds

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her #169609 von jimdavies
COM_KUNENA_MESSAGE_REPLIED_NEW
LSS attached.
Sorry, I'm not sure where to see the version of LS I'm using.
Anhang:

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her #169631 von tpartner
COM_KUNENA_MESSAGE_REPLIED_NEW
You can use scenarios in the conditions designer to insert an OR.

Having said that, it is far easier to use a relevance equation:

Q1 == '1' OR Q1 == '2' OR Q1 == '3' OR Q2 == '1' OR Q2 == '2' OR Q2 == '3'

Cheers,
Tony Partner

Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
Official LimeSurvey Partner - partnersurveys.com

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her #169640 von holch
COM_KUNENA_MESSAGE_REPLIED_NEW

Sorry, I'm not sure where to see the version of LS I'm using.

For future reference, you can find the Limesurvey in the bottom right corner of the admin pages.

I'm not a LimeSurvey GmbH member. I answer at the LimeSurvey forum in my spare time. No support via private message.
Some helpful links: Manual (EN) | Question Types | Workarounds

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her #169656 von jimdavies
COM_KUNENA_MESSAGE_REPLIED_NEW
Thanks holch. I'm on version Version 2.50+ Build 160810.

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her #169657 von jimdavies
COM_KUNENA_MESSAGE_REPLIED_NEW
Could you provide more detail? I don't see where I can change it from an AND to an OR condition.
Anhang:

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her - 11 Monate 1 Woche her #169658 von jimdavies
COM_KUNENA_MESSAGE_REPLIED_NEW
I added the relevance question but now question 3 never displays. Attachment shows what I did
Anhang:
Last edit: 11 Monate 1 Woche her by jimdavies. Begründung: Updated attachment

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her - 11 Monate 1 Woche her #169684 von tpartner
COM_KUNENA_MESSAGE_REPLIED_NEW
That is not supposed to be in the conditions designer. Delete all conditions for the question there and insert the equation in the Relevance field when editing the question.

Maybe the manual would help.

- manual.limesurvey.org/Questions_-_introd...n#Field_descriptions

- manual.limesurvey.org/Expression_Manager...tion-Level_Relevance

Cheers,
Tony Partner

Solutions, code and workarounds presented in these forums are given without any warranty, implied or otherwise.
Official LimeSurvey Partner - partnersurveys.com
Last edit: 11 Monate 1 Woche her by tpartner.

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her #169739 von jimdavies
COM_KUNENA_MESSAGE_REPLIED_NEW
Thanks, I was able to get it to work. I appreciate your help and patience!

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her - 11 Monate 1 Woche her #169817 von jimdavies
COM_KUNENA_MESSAGE_REPLIED_NEW
Is there a way to set the condition on questions set up in an array? I followed the same logic and it's not working. Screen shots show the question and answer codes and the error I receive
Anhang:
Last edit: 11 Monate 1 Woche her by jimdavies.

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Mehr
11 Monate 1 Woche her #169818 von holch
COM_KUNENA_MESSAGE_REPLIED_NEW
You can, but you are referencing the subquestions wrong.

You need to tell Limesurvey which question you are referring to and which subquestion you are referring to. AS So what is the question code of this array question? Because Q12-Q16 seem to be the subquestion codes.

So to reference the subquestions you need to go like this QUESTIONCODE_SUBQUESTIONCODE. If you would use numbers for the answer codes you could shorten your equation quite a bit by use >, < and = to define everything in one.

Lets assume you want to reference the subquestion Q12, lets assume the question code of the whole question is QC and the answer options are 1-5 and you only want 1-3 go further.

Then you could write something like this:
QC_Q12 < 4
If you put this into the long free text question as relevance equation, the question would open if the respondent answere 1, 2 or 3 in subquestion Q12 of question QC.

If you really want to stick to your current answer codes it will be more or less the same, you just will have to have a longer relevance equation.

I'm not a LimeSurvey GmbH member. I answer at the LimeSurvey forum in my spare time. No support via private message.
Some helpful links: Manual (EN) | Question Types | Workarounds

Bitte Anmelden oder Registrieren um an der Konversation teilzunehmen.

Jetzt loslegen!

Melden Sie sich jetzt an, und erstellen Sie in wenigen Minuten Ihre erste Umfrage.

Account einrichten

Abonnieren Sie unseren Newsletter

Abonnieren Sie unseren Newsletter für alle Neuigkeiten rund um LimeSurvey
captcha