Array

Mehr
4 Monate 11 Stunden her #183581 von acasadei90CRT
Array wurde erstellt von acasadei90CRT
Hello Community,

I'm trying to create a questionnaire where there are two questions:

1) one where you have to rate a product (scale from 1 to 5)

2) second one where you have to rate from 1 to 3 the three most important benefits of the previous products.

In the second question I would like to reduce the number of products based on the selection done in the first question: I would like to have just only the products that have been rated with 3 or more.

Is it possibile to do that?

I attached a file in order to better understand my textual explanation.

Best regards,

Andrea
Anhänge:

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

LimeSurvey Partners
Mehr
4 Monate 11 Stunden her #183586 von DenisChenu
DenisChenu antwortete auf Array
See relevance equation on sub questions : manual.limesurvey.org/Adding_answers_or_...fic_for_subquestions

Assistance on LimeSurvey forum and LimeSurvey core development are on my free time.
I'm not a LimeSurvey GmbH member, professional service on demand .
An error happen ? Before make a new topic : remind the Debug mode .

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 10 Stunden her #183592 von Joffm
Joffm antwortete auf Array
Hi,
1. first you should swap benefits and products in the second question.
Not only because of consistency but... there is no subquestion relevance on columns.

2. You should change your alphanumerical codes "A1", "A2" to numerical 0,1,2,3...
In the second question you are going to compare

3. Having done this you can set the subquestion relevance in s1001
s1001_SQ001: s1000_SQ001>2
s1001_SQ002: s1000_SQ002>2

With your codes "A1",... you had to enter: s1000_SQ001=="A4" OR s1000_SQ001=="A5" OR s1000_SQ001=="A6"
Furthermore: I am sure you want to calculate some statistics, like mean, t-test, or so.
What do you think is the mean of "A1", A2" and "A4". It is not "A2,33".

Best regards
Joffm


Volunteers are not paid.
Not because they are worthless, but because they are priceless

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 9 Stunden her #183600 von acasadei90CRT
acasadei90CRT antwortete auf Array
Hi Joffm,

I swapped products and benefits in the second question and I also changed the codes (in the first question - edit answer option).

Then I set the relevance equations in the second question but i have probably done some errors because it didn't worked.

I share a picture about the second question's setting.


Thanks in advance,

Andrea
Anhänge:

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 9 Stunden her #183604 von Joffm
Joffm antwortete auf Array
Hi, Andrea,

s1001_SQ001: s1000_SQ001>2 should mean:

In subquestion SQ001 of question s1001 you enter into the relevance equation s1000_SQ001>2

Joffm


Volunteers are not paid.
Not because they are worthless, but because they are priceless
Folgende Benutzer bedankten sich: acasadei90CRT

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 9 Stunden her #183606 von acasadei90CRT
acasadei90CRT antwortete auf Array
Yes Joffm,


I had also tried that solution but it didn't work so I thought it wasn't correct.


I attach the file. I launched the survey preview but the second question's rows still also appear independently by the first question's answers.
Anhänge:

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 8 Stunden her - 4 Monate 8 Stunden her #183608 von Joffm
Joffm antwortete auf Array
If you call your question "s1000", please use "s1000" in the relevance equation, not "S1000"



Some more words:
Remeber to check in each row that only three benefits are selected with different values.
This is done by subquestion validation.

Joffm


Volunteers are not paid.
Not because they are worthless, but because they are priceless
Anhänge:
Letzte Änderung: 4 Monate 8 Stunden her von Joffm.
Folgende Benutzer bedankten sich: DenisChenu, acasadei90CRT

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 8 Stunden her #183611 von acasadei90CRT
acasadei90CRT antwortete auf Array
Thank you Joffm,

Ops, I made a terrible mistake with that "s".

I will try to set the subquestion validation as you suggested to me.

Thank you again for your help.

Andrea

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 8 Stunden her #183613 von Joffm
Joffm antwortete auf Array
Keep calm, Andrea,
that's not a terrible mistake. That's a typo, but unfortunately you will never find yourself.

Similar to my "remeber" in the last post.

Joffm


Volunteers are not paid.
Not because they are worthless, but because they are priceless

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 7 Stunden her #183621 von acasadei90CRT
acasadei90CRT antwortete auf Array
Regarding to the subquestion validation i was trying to use the following logic:

1) Set the sum of the subquestions' answers must be equal to 6 (because there are only three possible value: 1,2,3)

2) There must be only 3 answers for each row, the others must be empty (because they have to choose the three most important benefits among all the possible one).


Is it a good way to do it or there are other better solutions?

Best Regards,

Andrea

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
4 Monate 6 Stunden her #183628 von Joffm
Joffm antwortete auf Array
Yes,
these are the two conditions:
Sum of answers ==6
Count of answers ==3

Joffm


Volunteers are not paid.
Not because they are worthless, but because they are priceless

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
3 Monate 4 Wochen her #183642 von Joffm
Joffm antwortete auf Array
You have also to check uniqueness to avoid "2+2+2"

Joffm


Volunteers are not paid.
Not because they are worthless, but because they are priceless

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
3 Monate 4 Wochen her #183651 von acasadei90CRT
acasadei90CRT antwortete auf Array
Hello Joffm,

Thank you very much for your suggest, it is also necessary to add that condition.

What is the code that I can use in order to set this condition on subquestion validation?

I meant:
SUM("subquestionvalue1", "subquestionvalue2", ……)

What is the code for the "subquestionvalue"?

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
3 Monate 4 Wochen her - 3 Monate 4 Wochen her #183661 von Joffm
Joffm antwortete auf Array
Hi, Andrea,

What is the code for the "subquestionvalue"?

This is not a serious question, is it?

Remember, what you entered in the subquestion relevance of the second question.
Something like "s1000_SQ001>2".
Meaning: The value of the subquestion "SQ001" of question "s1000" is greater then 2.
Here you have your subquestion value.

I thought about the validation a bit more.
Except the validations "sum==3", "count==6", "all unique" you have to check if the question is displayed. So you have to add sommething like the above "s1000_SQ001>2".

long.

So I think about a different design.
Instead of using an array(numbers)" with all the validation, use a ranking question where everything is built-in.

Have a look.

Dateianhang:

Dateiname: limesurvey...3793.lss
Dateigröße:36 KB


Volunteers are not paid.
Not because they are worthless, but because they are priceless
Anhänge:
Letzte Änderung: 3 Monate 4 Wochen her von Joffm.
Folgende Benutzer bedankten sich: acasadei90CRT

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
3 Monate 4 Wochen her #183815 von acasadei90CRT
acasadei90CRT antwortete auf Array
Thank you Joffm.

Sorry for the delay but I tried to adopt your solution to another questionnaire and I have just finished.

I had never used the ranking question but it is perfect for my purposes.

Thanks again and I wish you a great weekend.

Best Regards,

Andrea

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Jetzt loslegen!

Melden Sie sich jetzt an, und erstellen Sie in wenigen Minuten Ihre erste Umfrage.

Account einrichten

Abonnieren Sie unseren Newsletter

Abonnieren Sie unseren Newsletter für alle Neuigkeiten rund um LimeSurvey
captcha